Originally Posted by
PapaBean
Thanks everyone! So the doors caused me the most trouble because when I cut out the holes for them I realized the weren't actually square. So cutting the 1/4" Plexiglass was a pain. I got it from Lowes so they cut most of it off but when I got down to needing only and eighth or sixteenth cut they wouldn't do it. So I had to take a jigsaw and make some of my own modifications. Needless to say there are now some uneven edges and gaps but they are hard to see. Drilling the holes in the glass was also a complication. I found a bit that worked you just have to drill slowly and keep backing out to get rid of all the melted Plexiglass. As for the lights my brother is an electrician so he told me everything to buy and taught me how to wire it all together so I could customize it. All of the lights are set up on a timer and my hygrotherm that controls the humidity and temp will turn off the optional basking spot if it gets too hot and will turn on my humidifier when the humidity drops too low. As soon as I get a hole cut out for the humidifier. I'll try and add more pictures of the drill bit and humidifier if I can.
Sent from my DROID RAZR
That's good to know about the doors, I think that's the part I am least looking forward to building my cage :P Did you build your cage all in the same room? It looks like I am going to have to build mine in pieces and assemble the pieces in the room where it's going, wasn't sure if you would have any advice on that. Thanks!
1.0.0 Black & White Argentine Tegu-Kronos
0.0.1 Normal Corn Snake
0.0.1 Colombian Red-Tailed Boa
Bookmarks